陕西全自动模切排废机

飞达给纸部 Sheet Feed Section
       高速送纸飞达头主要零部件全部为进口，国內组装；配备飞达头快速调整裝置，可根据纸张情况自由调飞达头
的前、后、高、低，能更好的保证从薄纸到大克数的卡纸、瓦楞纸平稳送纸。

       采用四吸四送强力吸纸飞达，吸头可配合纸张的变形状况调整各种吸纸角度；两侧配有吹气装置，方便纸张分离，保证顾畅走纸。
       配置三道飞达头防撞保护装置，安全可靠。

清废部 Stripping Section
       两框联动清废装置，动作协调，精度准确。
       清废框采用上、中、下三框结构，可抽拉框装版，使清废部调整更方便、安全。
       采用电动控制提升混阳装置，操作方便快捷。
Sheet Feed Section

      The main parts of the high-speed paper feeder are all imported and assembled domestically.
       Fast adjusting device for standby flying head, which can freely adjust flying head according to paper condition
       Front, rear, high and low, can better guarantee cards from thin paper to large grams.
       Paper and corrugated paper are sent smoothly.
      Four suction, four feeding and strong paper suction are adopted. The suction head can match the deformed shape of the paper.
      Various paper suction angles are adjusted; air blowing devices are installed on both sides to facilitate paper separation.
     Leave, guaranteeing that Gu Chang walks the paper.
     It is equipped with three anti-collision protection devices for flying head, which is safe and reliable.
Stripping Section

     Two-frame linkage scrap removal device, coordinated action, accurate.
     The scrap removal frame adopts three frame structures: upper, middle and lower, which can be pulled and packed to  make the scrap removal clear.
     Waste adjustment is more convenient and safe.
     It adopts electric control lifting mixing device, which is convenient and fast to operate.